total mass 5 t
Characteristics of hinged equipment
The name of parameters | Characteristics | |
| HINGED EQUIPMENT | ||
Frontal brush | Type | Horizontal |
| Type according to the working period | Summer / winter | |
| Brush rotation drive | Hydraulic engine | |
| Number of revolutions, revol./min | 280-320 | |
| Width of cleaning zone, m | 1,6 | |
| Overall width, m | 1,9 | |
| Rotation angle of the brush (left-hand / right-hand), degree | 30 / 30 | |
| Brush rotation drive | Hydraulic, one hydraulic cylinder | |
| Thickness of snow layer, m not more | 0,05 | |
| Material of brash working organ | Polymer | |
| Mass, kg | 185 / 190 | |
Mouldboard plough | Type | Single |
| Overall width, m, not more | 2,2 | |
| Width of cleaning zone in working position, m | 1,9 | |
| Board height, m | 0,6 | |
| Angle of plough rotation left-hand / right-hand, degree | 30 / 30 | |
| Plough rotation driver | Hydraulic, one hydraulic cylinder | |
| Mass, kg | 165 | |
Tank and sprinkling bar | Volume, m³ | 2,00 |
| Width of watering zone, m | Up 2,0 | |
| Rate of motion of the car during performing operations, km/h | 10-30 | |
| Working organ driver: | ||
| - type | Electrical | |
| - maximum pressure, mPa (bar) | 4 (40) | |
| Body mass, kg | 150 | |
| Loading with the hinged working mechanism, kg | 2260 | |
The bunker for sand or sand mix | Loading | Mechanical through the hole in the cover |
| Volume, m³ | 1,4 | |
| Supply of mix to scattering body | Screw | |
| Width of scattering zone, m | 1-5 | |
| Rate of motion of the car during performing operations, km/h | 8-30 | |
| Doze of supply of mix, g/m² | 50-300 | |
| Working organ drive: | ||
| - type | Hydraulic | |
| - maximum pressure, mPa (bar) | 16 (160) | |
| Body mass, kg | 430 | |
| Loading, kg: | ||
| - with the hinged working mechanism | 1940 | |
| - without the hinged working mechanism | 2120 | |
| Loading with the hinged working mechanism, kg | 1000 | |
On-board tipper body | Unloading | Through tail and side boards |
| Body mass, kg | 280 | |
| Loading, kg | 2100 | |
Doorless tipper body | Unloading | Through a tail board |
| Body mass, kg | 270 | |
| Loading, kg | 2100 | |
Waste collection hopper | Loading | Manual, through extendable hatches in left and right sides |
| Unloading | Tipping through a rear door | |
| Volume, m³ | 5,00 | |
| Rate of motion of the car during performing operations, km/h | 15 | |
| Body mass, kg | 580 | |
| Loading, kg | 1800 | |
printable version
